Product info
TECHNICAL CHARACTERISTICS < br>
P / J APPROVAL
The helmet is homologated in the double P / J configuration, as it has a removable protection chin guard that passes the homologation tests provided by the UN / ECE regulations for full-face helmets . < br>
ULTRA-WIDE SCREEN
The wide surface of the anti-scratch screen (S / R - Scratch Resistant) allows greater vision, even from the side, thus guaranteeing maximum driving comfort and increasing active safety. In addition, it protects the rider's face from water and wind, while guaranteeing adequate air circulation within the helmet in case it is used with a jet configuration.
INTERIOR SCREEN WITH ANTIVAHO PINLOCK® SYSTEM
Supplied according to segment. The patented regulation system allows to regulate the Pinlock® draft, acting from the outside of the screen without having to disassemble it. The silicone profile, adopted under the Pinlock® license, allows, firstly, to increase the air chamber between the exterior and the interior, further reducing the risk of fogging and, secondly, to reduce the risk of scratches on the screen.
PARASOL SCREEN (VPS)
Made of LEXAN ™ *, with S / R (Scratch Resistant - anti-scratch) and F / R (Fog Resistant - anti-fog) treatments, offering UV protection up to 400 nanometers. It can be easily disassembled for maintenance and cleaning and can be adjusted in multiple positions. The drive system (patented) allows it to be automatically folded into the non-use position, thus simplifying possible emergency maneuvers derived from the need to quickly restore the maximum visibility offered by the screen.
*LEXANTM IS A REGISTERED TRADEMARK OF SABIC
CERVICAL PROTECTOR (NECK-ROLL)
Removable, washable and equipped with an exclusive regulation system, it is easy to adapt to the different morphologies of the pilots and to the multiple configurations derived from the different riding positions.
N-COM PREDISPOSITION
The helmet is prepared and approved for the installation of the N-Com communication system and the innovative ESS (Emergency Stop Signal).
COMPATIBILITY OF N-COM PRODUCTS
B901L R series - B601 R series - ESS - MCS III R series
POSSIBLE CONFIGURATIONS
The helmet can be used with eight different configurations. This is so since N70-2 GT is characterized by the presence of three elements (front, screen and removable protection chin guard) that can be mounted on the product in a contemporary way, in pairs or individually, as well as you can also do without all of them.
VENTILATION SYSTEM + AIRBOOSTER TECHNOLOGY
The exclusive "AirBooster Technology" upper ventilation system ensures optimal ventilation where the pilot's head needs it most: in fact , the air is extracted from the upper air intake and is forced, without dispersion, towards the most critical areas, in order to guarantee maximum comfort even in extreme driving conditions.
The ventilation system also It consists of:
- screen air intake
offers ventilation at the mouth level and directs air directly to the screen, reducing fogging;
- rear extractors
allow expulsion hot air nte and vitiated, guaranteeing optimal comfort inside the helmet .
MICROLOCK2 (patented)
It is a patented retention system with double lever micrometric adjustment. It is made up of an ergonomic opening lever made of thermoplastic material and a second toothed and retention lever, made of aluminum. The toothed lever releases the micrometer clamp, so the tether strap can only be opened after the release lever has made a very wide rotation. This measure reduces the risk of unintentional opening.
FASTENING STRAPS INTEGRATED IN THE LINING
The fastening straps integrated into the lining (and therefore removable and washable) favor the fit and adaptation of the < strong> helmet .
COMFORT INTERIOR PADDING "CLIMA COMFORT"
A new concept of padding that, made with double density micro-perforated fabrics and combined with the superior ventilation system "AirBooster Technology ”, Favors the diffusion of air in the upper area of the rider's head. The conformation of the chin guard facilitates the closure of the chin guard and protects from annoying air infiltrations in the chin area.
HELMET NOLAN N70-2 GT LAKOTA N-COM Flat Black Red
Colours
Product info
TECHNICAL CHARACTERISTICS < br>
P / J APPROVAL
The helmet is homologated in the double P / J configuration, as it has a removable protection chin guard that passes the homologation tests provided by the UN / ECE regulations for full-face helmets . < br>
ULTRA-WIDE SCREEN
The wide surface of the anti-scratch screen (S / R - Scratch Resistant) allows greater vision, even from the side, thus guaranteeing maximum driving comfort and increasing active safety. In addition, it protects the rider's face from water and wind, while guaranteeing adequate air circulation within the helmet in case it is used with a jet configuration.
INTERIOR SCREEN WITH ANTIVAHO PINLOCK® SYSTEM
Supplied according to segment. The patented regulation system allows to regulate the Pinlock® draft, acting from the outside of the screen without having to disassemble it. The silicone profile, adopted under the Pinlock® license, allows, firstly, to increase the air chamber between the exterior and the interior, further reducing the risk of fogging and, secondly, to reduce the risk of scratches on the screen.
PARASOL SCREEN (VPS)
Made of LEXAN ™ *, with S / R (Scratch Resistant - anti-scratch) and F / R (Fog Resistant - anti-fog) treatments, offering UV protection up to 400 nanometers. It can be easily disassembled for maintenance and cleaning and can be adjusted in multiple positions. The drive system (patented) allows it to be automatically folded into the non-use position, thus simplifying possible emergency maneuvers derived from the need to quickly restore the maximum visibility offered by the screen.
*LEXANTM IS A REGISTERED TRADEMARK OF SABIC
CERVICAL PROTECTOR (NECK-ROLL)
Removable, washable and equipped with an exclusive regulation system, it is easy to adapt to the different morphologies of the pilots and to the multiple configurations derived from the different riding positions.
N-COM PREDISPOSITION
The helmet is prepared and approved for the installation of the N-Com communication system and the innovative ESS (Emergency Stop Signal).
COMPATIBILITY OF N-COM PRODUCTS
B901L R series - B601 R series - ESS - MCS III R series
POSSIBLE CONFIGURATIONS
The helmet can be used with eight different configurations. This is so since N70-2 GT is characterized by the presence of three elements (front, screen and removable protection chin guard) that can be mounted on the product in a contemporary way, in pairs or individually, as well as you can also do without all of them.
VENTILATION SYSTEM + AIRBOOSTER TECHNOLOGY
The exclusive "AirBooster Technology" upper ventilation system ensures optimal ventilation where the pilot's head needs it most: in fact , the air is extracted from the upper air intake and is forced, without dispersion, towards the most critical areas, in order to guarantee maximum comfort even in extreme driving conditions.
The ventilation system also It consists of:
- screen air intake
offers ventilation at the mouth level and directs air directly to the screen, reducing fogging;
- rear extractors
allow expulsion hot air nte and vitiated, guaranteeing optimal comfort inside the helmet .
MICROLOCK2 (patented)
It is a patented retention system with double lever micrometric adjustment. It is made up of an ergonomic opening lever made of thermoplastic material and a second toothed and retention lever, made of aluminum. The toothed lever releases the micrometer clamp, so the tether strap can only be opened after the release lever has made a very wide rotation. This measure reduces the risk of unintentional opening.
FASTENING STRAPS INTEGRATED IN THE LINING
The fastening straps integrated into the lining (and therefore removable and washable) favor the fit and adaptation of the < strong> helmet .
COMFORT INTERIOR PADDING "CLIMA COMFORT"
A new concept of padding that, made with double density micro-perforated fabrics and combined with the superior ventilation system "AirBooster Technology ”, Favors the diffusion of air in the upper area of the rider's head. The conformation of the chin guard facilitates the closure of the chin guard and protects from annoying air infiltrations in the chin area.
Products
SCORPION EXO-TECH EVO CARBON ROVER Black White
SCORPION EXO-TECH EVO ANIMO Black White
LS2 FF901 ADVANT X SOLID Matt Black
SCORPION ADF-9000 AIR SOLID Cement grey
SCORPION EXO-TECH EVO CARBON SOLID Matt Black
SCORPION EXO-TECH EVO PRO SOLID Opaque metal blue
LS2 FF908 STROBE II Autox Grey H-V Yellow
LS2 FF906 ADVANT IRON Matt White Black Jeans
SCORPION EXO-TECH EVO ANIMO Black White
AGV E2206 MULTI MPLK FREQUENCY LIGHT GREY BLUE
SHARK EVO ES YARI Mat Anthracite Yellow Silver
SCORPION EXO 930 EVO SIKON Black-Silver-Red
SHARK EVO GT SEAN Orange Black Silver
LS2 FF901 ADVANT X Jeans
SHARK EVO GT BLANK White Azur
LS2 FF906 ADVANT SPECIAL Matt Silver
LS2 FF906 ADVANT SPECIAL Matt Sand
SCORPION EXO 930 EVO SOLID Cement gray
Subscribe to the Partsss newsletter!
Our news and exclusive offers are worth it.